Home

Home / Manufactured Synthetic Commercial Palm Trees

Manufactured Synthetic Commercial Palm Trees

Contact Us

Island Palm

Description of Island Palm

Features of Island Palm:

· Maintenance-free yet authentic-looking this Artificial Island Palm is designed for exterior or interior applications.

· All sizes reflect trunk height from ground level to top of trunk

· The Island Palm has a single tapered trunk that is individually hand molded – no two trees are identical

· Center core is all steel superstructure to withstand high winds and can move with wind direction

· Misting or high volume water system can be added to any tree

· Island Palm’s work best in groupings

Applications of Island Palm:

Island Palm’s work best in groupings at:

· Water parks

· Resorts

· Patios

· Shopping Malls

· Pool area

· Decks and Docks

Island Palm Specifications:

· UV stable polyethylene palm fronds

· Trunk is molded from advanced synthetic composites

· Island Palm’s are at a 60 degree angle

· Palms up to 14ft come with a flat steel base for easy deck mounting (bolts included)

· Custom Palms 16ft and taller must go into the ground with steel receiving sleeve (included)

· 8ft and 10ft trunk heights come with 9 x 5ft fronds and 3 x 2ft fronds (fronds can be upgraded to larger size)

· 12ft, 14ft and taller trunks come with 9 x 8ft fronds and 5 x 5ft fronds

· All trees supplied with 2 artificial coconuts

· Replacement fronds and coconuts are available

Dimensions of Island Palm:

· 8ft trunk

· 10ft trunk

· 12ft trunk

· 14ft trunk

TROPICAL PALM

Description of Tropical Palm:

Features of Tropical Palm:

· Maintenance-free yet authentic-looking this Artificial Tropical Palm is designed for exterior or interior applications.

· All sizes reflect trunk height from ground level to top of trunk

· The Tropical Palm has a single tapered trunk that is individually hand molded – no two trees are identical

· Center core is all steel superstructure to withstand high winds and can move with wind direction

· Misting or high volume water system can be added to any tree

· Tropical Palm’s work best in groupings

Applications of Tropical Palm:

Tropical Palm’s work best as a stand alone tree or in groupings with Island Palms:

· Water parks

· Resorts

· Patios

· Shopping Malls

· Pool area

· Decks and Docks

Tropical Palm Specifications:

· UV stable polyethylene palm fronds

· Trunk is molded from advanced synthetic composites

· Tropical Palm’s are upright with no bend

· Palms up to 14ft come with a flat steel base for easy deck mounting (bolts included)

· Custom Palms 16ft and taller must go into the ground with steel receiving sleeve (included)

· 8ft and 10ft trunk heights come with 9 x 5ft fronds and 3 x 2ft fronds (fronds can be upgraded to larger size)

· 12ft, 14ft and taller trunks come with 9 x 8ft fronds and 5 x 5ft fronds

· All trees supplied with 2 artificial coconuts

· Replacement fronds and coconuts are available

Dimensions of Tropical Palm:

· 8ft trunk

· 10ft trunk

· 12ft trunk

· 14ft trunk

Jungle Palm

Description of Jungle Palm:

This artificial palm tree comes with Monkeys, Birds and Jungle sounds!!

Features of Jungle PalM
         Maintenance-free Artificial Jungle Palm is designed for exterior or interior applications.

     All sizes reflect trunk height from ground level to top of trunk

     The Jungle Palm has a single tapered trunk that is individually hand molded – no two trees are identical

    Center core is all steel superstructure to withstand high winds and can move with wind direction

Available in three water delivery systems – nozzles or shower headS.

       Fits all existing plumbing, even a garden hose

        Available as a receiving sleeve mount or round flange plate to bolt directly to existing water-play structures.

Applications of Jungle Palm:

Jungle Palm’s work best as a stand alone tree or in groupings with Island Palms: Waterparks , Resorts , Patios , Shopping Malls , Pool area , Decks and Docks

JungLE Palm Specifications:

· Comes standard with 3 chips clad in bright colored trunks and 2 tropical birds, all waterproof and uv treated

· Wired with outdoor speaker and supplied with jungle sound CD

· 12 x 8’ UV stable polyethylene palm fronds with 16ft frond span

· Trunk is molded from advanced synthetic composites

· Jungle Palm has a 12ft trunk

· Comes standard with an 16” x 16” flat steel base for easy surface mounting (bolts included)

· Water systems to choose from:

o Misting system – for a cooling effect

o 6 x high volume adjustable water nozzles – for kids to play

o 4 x super soaking shower heads – to hose down

· 2 FREE artificial coconuts

· Replacement fronds and coconuts are available

Dimensions of Jungle Palm:

· 12 ft trunk

· 16 ft frond span

faqs of SYNTHETIC palm TREES:

How do the Palm’s hold up outdoors?

We have engineered the palm trees to withstand even the harshest environments. They are designed to react to Mother Nature just like real palm trees, with an all-steel superstructure for tremendous strength and durability.

Will my palm tree leaves fade?

The huge fronds are completely fade resistant made from a UV stable polyethylene

Are the palm trunks also weather proof?

The outer core of the trunks are hand fabricated from a synthetic composite that gives the trees their weather proofing, durability and true feel of a real palm tree. And since they don't come out of a mold, no two palm trees ever look exactly alike.

Is there a warranty on your palm trees?

They are engineered so well we back them up with a full 1 year manufacturers warranty against defects.

* Prices subject to change without notice. Please see our price list for current prices.

we offer volume discounts on Island Palm - Please call, Toll free: (800)984-5448

Installation of SYNTHETIC Palm TREES:

Installing the Palm Tree Trunk

(For large custom trees over 14ft, call or email for special instructions)

FOR CONCRETE INSTALLATION

Carefully remove Palm Tree from container and place it upright where it will be installed. After positioning is complete, drill down through existing holes of the base using a ½ inch masonry bit into the concrete @ 4 inches. Gently tap the enclosed concrete bolts through the base into the concrete and tighten nut, being careful not to over tighten bolt; too much torque can break the bolt. If pouring new pad, refer to these specs:

For stock trees 8, 10, 12 & 14 ft tall. It is recommended to dig a hole 30” x 30” x 12” deep. Drive six 2 ft rebar stakes into the hole, leaving 4” – 6” rebar exposed in the hole, so that when the concrete is poured and cured, the new concrete pad is “anchored” to the ground. This pad will accommodate up to three palm trees.

Important to Remember! The palm trees are very top heavy and will catch a lot of wind. Be safe, don’t cheat, respect Mother Nature! (check local codes before digging!)

FOR WOOD DECK INSTALLATION

Carefully remove Palm Tree from container and place it upright where it will be installed making sure you have tree positioned over deck joist so that 2 to 4 lag screws will catch the joist. After positioning is complete, drill the enclosed lag screws in through each corner of the base using washers. Using the enclosed lag screws and washers place one lag and washer in each corner and tighten. Be careful not to over tighten; too much torque can cause the lag screws to sink down into your decking and “spin”, causing the tree not to be secure.

Installing the Palm Leaves

(IMPORTANT: please read completely before proceeding)

Each palm tree comes with 9 large fronds and 3 small fronds. 8ft & 10ft trees come with small sets of fronds, and 12ft, 14ft & taller trees come with large sets of fronds.

After the palm tree has been properly bolted down, you’re ready to insert the fronds. This is very easy, but this step needs to be done properly so that your tree has a very natural look.

1) Insert the 9 large fronds in the set of leaves into every other slot in the cap at the top of the trunk. Make sure the steel support of the fronds is facing out, or away from the trunk. Each frond will easily slide through a top slot and continue on down through a bottom slot. This secures the fronds from twisting and blowing out.

2) Now bend every other frond down into position until they are slightly lower than level with the top of the cap. Do this by grabbing the frond about a foot from the cap and gently but firmly pull (bend) the fronds down.

3) Bend the remaining fronds down to about a 45 degree angle. Slightly alter how much you pull each frond down so that you end up with a very full look, but not exact uniformity. This will make your trees look very natural.

4) Insert the remaining 3 smaller fronds in a random triangle pattern using any of the 3 empty slots in the cap. Make sure the steel support of the fronds face away from the tree. These smaller fronds represent new growth fronds and will also make your tree look more realistic. You may want to very slightly bend them down also.

5) Attach the coconuts to the wire loop located near the top of the frond cap.

*It is not necessary, but if you live in an area with extreme wind conditions, you may want to help secure the fronds by filling the cavity in the frond cap with an expanding foam, such as “Great Stuff”, available at any hardware store.

*We recommend to remove and store your fronds and coconuts for extreme winter conditions to prolong their life. A plastic bag over the top of the trunk is sufficient for the palm tree.

Please email photos after your palm trees are installed. This activates your warranty and allows us to see if slight corrections can be made so you will enjoy the palms more.

Protecting Your Palms

Suncoast Tiki Huts recommends that the leaves be removed during the winter months. The top of the trunk should be completely covered to prevent water from freezing. Additional palm leaves are available if needed.

REPLACEMENT PALM FRONDS - STAINLESS STEEL

REPLACEMENT PLAM FRONDS - MILD STEEL

UPGRADES